Skip to content
Contactivity

SIP trunking

SIP trunking connects your PBX, contact center or SIP devices to the phone network, so they can call any US or Canada number and receive calls on your numbers.

How it works

  1. 1

    Create a trunk

    Pick how it authenticates: registration, IP allow-list or host. The choice is fixed once the trunk is saved.

  2. 2

    Connect your equipment

    Register each device with its own credential against your SIP domain, add the public IPs you send from, or list the hosts we send calls to.

  3. 3

    Route your numbers

    Route a number to the trunk to receive its calls. Outbound calls show a caller ID you own or have verified.

Features

Registration
One credential per device: a username of 3 to 64 characters and a password of 12 to 128. Devices register against your SIP domain.
IP allow-list
Accept calls only from the public addresses you list, up to /29 for IPv4 and /125 for IPv6. No username or password.
Host
We send inbound calls to your servers, entered as host or host:port and tried in order.
Ring strategies
Ring all, sequential, round robin, longest idle or random, with 5 to 120 seconds per device. Unregistered devices are skipped.
Caller ID
The caller ID your equipment sends is used when it is yours. Otherwise the trunk's default caller ID is used, or the call is refused.
Recording
Record every call on a trunk, or the inbound calls to a number.
One SIP domain
Every project in your organization registers against the same SIP domain.
Account limits
Calls per second and concurrent calls follow your account tier. Extra calls per second can be bought.

Register a device

# Add a device to a registration trunkcurl https://api.contactivity.io/v1/projects/$PROJECT_ID/trunks/$TRUNK_ID/credentials \  -H "Authorization: Bearer $CONTACTIVITY_API_KEY" \  -H "Content-Type: application/json" -H "Idempotency-Key: $(uuidgen)" \  -d '{"username": "frontdesk-101", "password": "correct-horse-battery"}'

Questions

Which authentication should I pick?

Registration for phones and PBXs that sign in with a username and password. IP allow-list for systems that send from fixed public IPs. Host when we should send inbound calls to your servers. It cannot be changed later.

What caller ID do my calls show?

A number bought in your project or a verified number. If your equipment sends anything else, the trunk's default caller ID is used. With no default, the call is refused.

Can I raise calls per second?

Yes. Move up a tier, buy extra calls per second, or contact support.

Where can I call?

US and Canada numbers. International calling needs Tier 3 and approval.

Start in the sandbox

Try trunks, voice apps and flows with calls to your own verified numbers, before you add a card.

Create an account